|
| I have a producer running direct command on a Patriot sprayer. He creates the field boundaries while he is making his first pass around the field. He says when he is done spraying the field his acres are 5-6% short. Example: Field boundary= 38 acres/ Applied acres= 36 acres.
He is using Ez500 for GPS source and speed. Boom widths are set correctly. When the insight was in the planter the planting acres came out about right for site verification. Any suggestions?
Thanks
Edited by agrsquiggly 5/26/2008 23:30
| |
|
Insight acres off w/ Direct Command
