Near Intersection of I-35 & I-90 Southern Mn. | JAR - you are probably aware of this but many of our customers are not.
If you go to a new region for each new tank you can enter the tank name or number. The subtotals for the region reset to zero so you have totals for acres and product for each tank. This is listed on the summary screen.
An application report can also be created which is in the .pdf format. This report consists of a map pate and then a listing for each region. Each page can hold two regions.
One of my Coworkers does this with hog manure with the "honey wagon". He switches to a new region fro each load in the same way.
Your math for the MT conversion makes sense to me. Multiplying by 4.22 unconverts the pounds back to gallons but I am surprised you needed to divide by 10. The 10 factor usually only comes about when using a Raven flowmeter.
If your totals are reasonable for each tank then you are using the proper meter cal. The confusion with this process is that with an Insight you divide the Raven cal number by 10 but with an EZ-Boom you don't. |
AgLeader Insight Pulses/Unit for NH3
