Near Intersection of I-35 & I-90 Southern Mn. | You COULD remap the switches but you shouldn't need to as they will default to F1 - Master and F2- Fx as the next boom sections.
Remember for the boom sections to come ON several things must be set properly.
Master ON - Boom switches ON
Target Rate non zero- The target rate will default to zero with a new product or configuration. This is the one that is commonly overlooked
Implement switch jumper in place for a sprayer or an actual implement switch in the application position.
AutoSwath OFF for test purposes.
Push the SYSTEM button and then look under the TAB for Input diagnostics. You should see several boxes indicating the status of various switches. The boom switches that are attached to the system are either Black or Green. Those that are grey were not physically detected by the system through the Switch Presence routine. The box color should change from black to green as you try the various switches.
If these boxes are not the way you feel they should be then you have a connecton problem between the switch box and the AIM module. Switches F1 (normal Master) - F10 are handled by the Green 12 Pin Deutsch connector. F11 (Often Boom 10) and the power for the boom box come through the Brown connector. E2 is an optional Master which can be used with the Raven adapter harness and it is also in the Brown connector which is a Tee when the Raven adapter harness is used.
Edited by tedbear 5/10/2008 15:48
|
Added more boom sections to insight now?
