|
| Dad and I have a EZ-Boom hooked up in our Case IH 3185 sprayer with a EZ-500 and EZ-Steer. The EZ-Boom is hooked into our Raven 460 monitor. So, the Raven does the rate controlling and the EZ-Boom does the shut off. We have the 5 sections turned on, on the EZ-Boom, and the 5 sprayer switches turned off. The problem is that boom section one does not get any power and does not spray. The only way we can make it work is to turn boom one and two (or boom one and any of the other boom section), of the sprayer switches, on. By doing that, we now have power to boom section one, but then boom one and two turn on and off at the same time. That means that sometimes we have a skip and sometimes an overlap. Where should we start to look to find out our problem. TIA. | |
|