AgTalk Home
AgTalk Home
Search Forums | Classifieds (210) | Skins | Language
You are logged in as a guest. ( logon | register )

Trimble to Greenstar
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 4/20/2008 08:16 (#361741 - in reply to #361693)
Subject: Re: Trimble to Greenstar


Near Intersection of I-35 & I-90 Southern Mn.
I haven't done this exactly but were you using the Insight to set Port B on the 252?

I have a 332 with Port A connected to the Autopilot which connects to an Insight. It appears that I could use the Insight to set Port B on the 332 but I have not explored this as I have no need for Port B in my situation.

The Omnistar correction may be part of your problem. I would try it with the 252 temporarily set to WAAS so see if you can get GPS info to the Greenstar that way. If that is successful then try the Omnistar correction again.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)