Posted 4/16/2008 16:59 (#359342 - in reply to #359338) Subject: Re: Connecting my EZ-Steer setup to a GS1
Are your NMEA strings setup like this? Is RMC set to yes?
The receiver must output the following NMEA 0183 standard messages:
• GGA
• GSA
• RMC setup at 19200 baud
• Data Bits 8
• Parity None
• Stop 1
• Flow Control None
• 1 or 5 Hz output rate (Parallel Tracking and Swath Control Pro require 5 Hz)