|
NW Iowa | The first thing I would do is to go into setting > system > advanced > save/load configurations > save configuration and save the current configuration as planter. Then exit out to settings, go to implement and then turn off Field IQ. Exit out of that and then go to field on the top right and go through that until you get to your implement. Now you should be able to set your implement width. After that is set up I would go back to save that configuration like before but save it as tillage or name if for the implement you have. Now you should be set and when you go back to the planter next spring you can go back and load the planter configuration with out having to reenter all the measurements. | |
|
How to change implement width on FM750 with Field IQ?
