AgTalk Home
AgTalk Home
Search Forums | Classifieds (198) | Skins | Language
You are logged in as a guest. ( logon | register )

enabling waas correction
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 3/31/2008 14:54 (#346513 - in reply to #346445)
Subject: Re: enabling waas correction


Near Intersection of I-35 & I-90 Southern Mn.
I just went through this over the weekend. Since I have a 332 running under 3.56 I was able to go in and change the WAAS satellites to only Heed Health on 135 and 138. I believe upgrading to 3.57 would have done that for me. Since this is a one time deal it is not much of a problem with a 332.

Since I had alot of confusion with the different versions of firmware. I wanted to test my system both with Omnistar XP and also WAAS. This is easily changed on the Insight Autopilot page. For me I could have changed it directly on the 332 but then the Insight would always change it back. It is far easier to just change it on the Insight. Another choice would be to set Auto Configure to OFF on the Insight and just change from Omnistar XP to WAAS on the 332 when necessary.

My system seemd to work properly with the 332 @ 3.56, the Nav II @ 4.42 and the Insight @ 5.0 using Omnistar XP and later with WAAS.

Edited by tedbear 4/1/2008 07:11
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)