|
SE Iowa | Switching my planter and sprayer over to insight control this spring. I was initially misinformed that the insight would be able to replace my raven console for my capture unit. For planter fert. application of 4-12 gal/acre what would be the most practical pump setup to run through raven flow meter and control valve so that I have control with my insight. Currently running a 5 gpm shurflo electric pump, which I could stick with, but not sure what's going to happen when I back my gallons off to the lower end. Without the raven console, that pump is going to run wide open all the time. A hydraulic or pto pump would be the next easiest, but either would be a pain. Any thoughts are much appreciated. | |
|