|
SW Missouri | I too have put one in a Patriot that had a 460 in it. I don't remember having to build a jumper but it has been a while back. One thing that you will have to check on has to do with the flowmeter. I was installing EZ-Boom on an 8103 TerraGator and when I finally got the boom sections working we had a problem reading flow. The problem was that the flowmeter on the TerraGator was a 12 volt flowmeter(usually a 3 pin triangle connector) and not 6 volt(3 pin round) and the EZ Boom can only handle the 6 volt kind. (Anybody out there that knows more about these flowmeters tell me if i have been misled) So you might want to check what type of flowmeter you have. Hope this helps | |
|
EZ-Boom in a Rogator w/ a 661 Raven... Trimble if you're reading this I would appreciate a contact.
