|
Chilliwack BC | We did our Lx465 last month and it was loose. We used red loctite and it set up tight within 2 minutes.
There was another thread about this a couple weeks ago and got me thinking. This is an uncommon style of hub as there is another seal between the 2 bearings. With a sealing surface in the middle of the hub, maybe it doesn't allow the notches for a punch to drive the old one out, so they purposely machine it a loose fit. 3 different series coverng at least a dozen years have this "problem" so it likely isn't a lazy machinist on a Friday afternoon.
Keep the parts you have and don't yell at the parts people over this. | |
|
New bearing race turns in hub
