AgTalk Home
AgTalk Home
Search Forums | Classifieds (34) | Skins | Language
You are logged in as a guest. ( logon | register )

Outback S3
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
PhilJ
Posted 2/1/2008 09:53 (#298339 - in reply to #297642)
Subject: Re: Outback S3



NEWTON, IL (SE IL.)
Seems to be a secret. The specs did get leaked out a few weeks ago. As follows:
OUTBACK S-3
Features:

Large 8.4" color touch screen
Coverage Map
Straight & contour guidance
eDif Technology - No annual fees
Recording
Operator
Paddock
Weather
Hazard
AutoSteer upgrade
Boom switching upgrade
Specifications:

Computer (CPU)
Processor 500 MHz AMD
Memory 512KB SDRAM
Storage 1 GB Solid State Internal, USB 2.0 External Thumbdrive
Operating System Microsoft Windows XP Embedded Specific/Dedicated to Outback S3 Application
Display type LCD 640x480 VGA, CCFT Backlit, TFT Touch screen, 8.4 inch

Mechanical
Type Aluminum with Rubber Gaskets
Size 190 H x 235 W x 70 D mm (7.5 H x 9.2 W x 2.7 D inch)
Weight 2.0 kg (4.4 lbs)
Mount Adjustable Ball Mount with U-Bolt Base

GPS Sensor
Receiver Type Crescent® L1, C/A code, with carrier phase smoothing (patented COASTTM technology during differential signal outage)
Channels 12-channel, parallel tracking (10-channel when tracking SBAS)
Differential Type RTK, SBAS (WAAS, EGNOS, MSAS, etc.), (e-Dif optional)
Update Rate 10 Hz (20 Hz optional)
Horizontal Accuracy <0.02 m 95% confidence (RTK)
< 0.6 m 95% confidence (DGPS)
< 2.5 m 95% confidence (autonomous)
Antenna CDA-3RTK with magnetic mount

Communications
Serial Port 1 full duplex RS232, DB-9(F)
CAN / Power Circular 7-pin
USB 2.0 Host, A-Type
Differential Input Dedicated RTK Differential Serial Input, Circular 8-pin
Ground Speed Interface Pulse Out, Range: 0.8 - > 322 km/h (0.5 - > 200 mph), Circular 6-pin
Data I/O Protocol NMEA 0183, SLX binary, NMEA 2000

Environmental
Operating Temperature -10° to +50° C (+14° to +122° F)
Storage Temperature -20° to +60° C (-4° to +140° F)
Electrical Compliance FCC Part 15-Subpart B, CE (ISO 14982)
Shock and Vibration EP455

Power
Input Voltage 9 - 16 VDC (Reverse and Over-Voltage Protected)
Power Consumption
Current Consumption

Cables
Antenna cable RF-Coax, 90° TNC(M) to 90° N(M), 8 m
CAN-Power cable 90° 7-pin Circular Split to CAN 7-pin Circular, Power Delphi(F), Remote Delphi(M), 4.6 m
Battery Cable Power Delphi(M) to 2-5/16 inch Ring Terminal, In-Line 5A Fuse, 1.5 m
Foot Switch Run/Hold

Looks like a nice unit.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)