Central To Everything and Close to Nothing | The weatherpak connection on that harness is for a work switch. All the lightbar is looking for is an open or closed circuit to toggle the coverage on and off with that connection. Whatever you do, don't run 12V into that conection as you could toast your lightbar. If you are coming off of a boom switch or master pump switch on your sprayer, use a 12V relay. If you are just using a foot switch or toggle switch, then you don't need a relay. If you do use your master pump switch as your work switch for the lightbar, I would put another switch between your 52033 harness and your pump switch. That will allow you to have your pump on yet shut the coverage off for the times you don't want any coverage on your screen, ie. agitating your spray solution while going down road.
Hope that helps |
EZ Guide plus / EZ steer / remote / boom switch ??
