|
Redfield, SD | You don't happen to remember the update version? You may have had to choose between 7.01B and 6.60B If you are not running Harvest Doc you should have chosen 6.60B, the yield mapping software for side mounted moisture sensors. You may need a keycard to do this, unplug the processor, turn on the key and then plug in the processor. I don't know if this will let you reprogram or not, you will need to get the system programmed to tracking then go to Info, Reprogram, Program Target, Mapping Processor, load the software with the word Key in it. Once this is done, go to Info, Keycard, Program Target, Moisture Sensor, choose 6.60B and see what happens. I am better at this when I am in front of the display. I hope this helps. If not sorry. | |
|
Greenstar update problem AGAIN
