|
Delta | Am I correct that there should only be two hoses coming from the header into the single point hookup? DarrelS, I think my setup is different because I have the switchbox and solenoid to swap between folding and deck plates. The way I understand it, the same set of hoses is supposed to do both by redirecting flow to different cylinders. When I press the reel fore aft button, only one of the two hoses that matches up with the hoses coming from the header gets fluid.
I don't know if I have the hoses configured incorrectly or what. Is the hydraulic setup on a 7078 the same as an 8120?
Edited by FarmWeather 8/21/2013 05:30
| |
|