|
Clear Lake, IA | '09 Drago on a 9650STS, Like the head and like the job it does chopping. It puts the corn in the machine and chops second. If you are not running the head at 650-680 RPM it does a crap job of chopping. If you run it at the RPM the book tells you to it does a great job. If you have a pile of fluff on your head and are combining 13% corn, buy the dry corn kit and it solves the problem. If you want it to chop better put on either the Turbo Chop or the fine cut kit. The wettest corn we cut last year was 18% and on that it did a excellent job. This picture was in 14% corn with less then new blades, no turbo chop, no fine cut kit, 5.8mph and 160ish bpa corn. If the deck plates are not working take them apart, clean them and put in the grease that Drago had specifically made for them.
(Drago Stalks.jpg)
Attachments ---------------- Drago Stalks.jpg (103KB - 339 downloads)
| |
|