|
Wolcottville,Indiana | Hi Grainman,
I don't know how to post pics so I'll try to walk you through it on a JD 1770, martins with cleansweeps (PP), starting from the cyclinder up,(cyclinder is on the left side) two lines under the cross member with two tywraps on them going from left to right (behind the unit) rotating them up to the top of the lower right hand lower link 1 tywrap there and they go under the hex seed drive shaft and maybe touch the 6x6 frame and are bent back the air brackes (airforce) and tywraped to the airbag bracket hole (all this on the right inside of the hopper brackets) then just loop over the vac tube and fertizer tube and straight into a tee on top of the 6x6 frame. the two feed lines run on top of the frame.
Good luck Chuck | |
|
Pictures of CleanSweep air line routing
