|
| I had a cement approach on a landlords building heave up on me and was causing issues with the doors, I bought a few masonry blades for a circular saw, and cut slits about 1" apart, then used an air chisel and chipped off the sections, then I used a masonry grinding stone to smooth things down. I knocked off 1" about 4" wide x 16 ft. It takes a little time,( I think we did ours in about 4-5 hours ) but actually went pretty good, once you learn the knack of it. You can get those blades at most home improvement stores or your local hardware or redi mix plant might have them too.
I had a garden hose running to help out on the dust... MESSY JOB !, | |
|
Cement ?
