| 4310 - 4/11/2013 10:24
jd8430e How did you get your clutches set up as every row instead of every 2?
From planter home screen hit planter menu (key G). Select drives from top tabs, select "Row Control Sections" from box below tabs, press set button at bottom of screen and it will walk you through. First select # of sections,16, than you have to enter first and last row of each section etc. Good luck!
Fwiw you will probably want sf2 or rtk to run individual row shutoff.
Edited by jd8430e 4/11/2013 11:04
|