|
North Dakota | I currently run a Patriot 150 with the Dickey John CCS and CCM ( I think thats it) monitors in it. I am going to replace them with a ez guide plus and install a flow meter. The Dickey John runs of a pressure sensor so thats why I need to install flow meter. Have any of you installed a ez boom on this type of system?
One thing that is a little different about this system is that when you hit the floor switch to shut it off it closes the flow meter instead of shutting off the boom sections. I have never liked this as it seem to dribble more till the pressure gets out of the lines. I have talked to my trimble dealer but they have not run into one of these yet. So any advice or pointers you can give would be appreciated. | |
|