|
Southeast SD | Yes I agree that the jake problem is not the engine swap, because it did work when we got the truck. I was meaning the cruise problem is the ECM not talking with the speedo.
No I have no tried to test the jakes just sitting in the yard, just tried it on the road. It has a low, med, high switch as well as an "On/Off" switch right next to it. These are the only two switches in the cab for the jakes.
I didn't notice anything different about the bolts for the jakes. I woudl have to take a cover off again and look it over, I followed the assembly manual we had for the motor and torqued everything as spec'd.
As far as I know I put everything back together correctly. I'll have to double check my manual and take a couple of covers off and double check things. | |
|