|
Treynor IA | Wiki says: There are two types of jet pumps. Deep well jet and shallow well jet. The deep well has it's jet (ejector) in the well. The jets come in two different configurations. Two pipe and single pipe. The two pipe uses two pipes lowered into the well to the existing water level with the jet on the end. The single pipe jet is hung in the well with only one pipe. The jet has two leathers to seal it to the casing making the casing the second pipe. The shallow well jet pump has it's jet on or in the pump. These pumps can only lift water 25 feet.
Once primed, the jet pump will force water down the pressure pipe into the jet, where it will be sent through a nozzle (of differing sizes depending on pump and water level) and into a Venturi tube (also differing in sizes) which creates a vacuum that will send more water up to be captured in the storage tank.
Read more: http://wiki.answers.com/Q/How_does_a_jet_pump_work_in_a_water_well#...
Never try to pull pipe from a deep well without the proper equipment. | |
|
|
Speaking of water wells, saddles, etc(Problems)
