|
northwest missouri | Still having trouble with EZ 500 communicating with JD yield monitor. Slow to get differential correction, then works ok except the JD loses GPS location all together several times during the day. The 500 seems to have signal all the time, just not communicating. I have the latest software upgrades on both units - set at 1 hz, 4800 baud, 138 sat. set to heed health. Have tried operating with VTG turned off and on seems to make no difference. Old EZ + worked fine with same cabling and settings. Anyone else have any experience or advice with this problem? | |
|
Problems EZ 500 > JD yield monitor
