|
Southwest Ontario | When runniing sprayer using aim command my
Right hand side electric control valves start to sporradicly work. At night things work fine , in the morning after folding and starting a new field section 5 or 6 or7 won't come on, sometimes section 4 behind the sprayer wont start either. Checked the splice packs and connections on the valves. Can get each valve to open when I put 12 volt power to them. Found out the aim command still works when power to valves is disconnected, so for now am running with valves 4-7 un plugged after powering them open with 12 volts. Why are they not getting power to keep them open all the time on their own. What else do I need to check and what order do I start. Do I need a schematics of the harness first ? | |
|