|
South Eastern ,ILL | We installed plastic netting on the bottom of the trusses in our open shed, to hopefully solve our bird problem. We used plastic netting from Industrial Netting
Supply.The holes are 1"x1" , and the rolls of netting were 12' X 75' . We used plaster lathes boards & nails with plastic, to hold the netting tight and in position. The plastic is very tough. The first picture is the netting installed and the second is the netting up close. It was hard to get a good picture because the netting is very hard to see installed.Cost was about 700$ for our 48'x 75' building.
Edited by 1000 moline 6/13/2012 22:32
(DSCN2731.jpg)
(DSCN2732.jpg)
Attachments ---------------- DSCN2731.jpg (47KB - 70 downloads) DSCN2732.jpg (108KB - 73 downloads)
| |
|