|
Nevada, Iowa | The total length is a little over 12'. Height is 38", the top is 35" deep. Drawers are 32" x 24". All the drawers are the same pattern but I increased the top clearance from top to bottom for larger items. The steel top is 3/16" and was bent to roll over the front edge. The CPL is a knock off and it usually sets on the back of a 1975 GMC pick up with a flatbed, it'll go back there soon. I needed some tools in the new shop to work on the planter and didn't have the bench far enough along to fill up. Still not quite there, I need to put drawer pulls on and build dividers in some of the drawers. Thanks | |
|
Shop Work Bench
