|
Redfield, SD | If your processor is programmed to yield mapping the system does not automatically update any software. You need to go to Info, Reprogram, Program Target, Mapping Processor(possibly on page 2), select the program with the word Key in it and let it program the processor out of mapping. Once this is done you will get a warning about tracking loaded but it is on a mapping system. At this point, make sure you cancel. This should then start automatic updates for the components which need updating. If you were sitting in front of the display and we were on the phone I could walk you through it.
Let me know | |
|
Original Greenstar Update again
