|
| I bought a Thermal dynamics Cutmaster 52, it will cut 1/2" just fine. You may want to look at the cutmaster 42, its rated for 3/8", I would suggest you consider one rated for 1/2" just so you're covered, and so you won't be taxing your PC by running it at its max Amps all the time. The CM52 is USA made, and the CM42 is an import, but have heard good things about it. Research them hear, this is a good site for that stuff http://weldingweb.com/showthread.php?t=49750 | |
|