|
SE Georgia | My 8400 did that so I was going to get a portable align boring machine,but didn't want to take the tires off so I just put the new bushings in and put some belzone in the void that was left.It is a hard 2 part epoxy.I also drilled a hole and put a grease fitting in.I wasn't sure if it would work,but I ran it for 2 more years on a 1720 12r38 planter before I swapped planting tractors with no trouble. I smoothed it off and put a little paint on it and you would be hard pressed to tell I did it. | |
|