|
Sunnyvale, CA | Get the AgRemote program from the Trimble Ag132 web site (http://www.trimble.com/aggps132_ts.asp?Nav=Collection-4361) and see if you can configure the output port parameters to NMEA out (NONE for Input) at whatever baud you need as 4800, 8-N-1). Also use AgRemote to turn on the NMEA messages you want, like GGA, VTG, RMC or whatever your program needs. If you set the same port you connect to to talk TSIP, first set the NMEA messages before you change from TSIP to NMEA. | |
|
Trimble hookup questions
