|
NW Ohio | We used to have a 2294 and a 2090. I removed the pipe plug on the back of the tractor and put a hydraulic coupler there. Worked fine. The plug was some where between the pto shield the row of hydraulic outlets at the back of the tractor. I'm thinking that it was a 1/2 in plug. I just used 1/2 threaded pipe, turned it in, and attached the 1/2 pipe thread female coupler. I plumbed a short piece of hose with two male ends that I used from this return to the second remote line while using a one-way cylinder (7000 marker arm). | |
|