|
Mid-East Nebraska | Kits AR223359 and RE259973 are available through Service Parts to install roof mounted side and front flood lights.
An additional set of side roof lights can be installed on tractor if zero or one set of front cab roof flood lights. Order following items through Service Parts. See side flood light installation instructions AR223360 for possible hardware to secure lights to bracket.
Part Number
Quantity
Description
RE181281
2
Flood Lamp
RE238231
1
Wiring Harness
- needed only if front-mounted roof line lights are NOT installed
Connect RE238231 to 8-pin connector located in cab roof.
Connect new side roof lights to 2-pin connectors.
NOTE: If tractor has front inner roof lights installed. Wires for circuit 198 and 010 going to E170 and E173 connectors will need wire spliced in to extend the harness to side light mounting bracket. Solder splice and cover with heat shrink tubing.
Note: If front roof lights are installed, connect front lights to 2-pin connectors.
Mount lights to existing bracket and secure wiring harnesses.
Configure address CLC 53 as follows to enable lights.
Light Location
CLC 53 Display
Front Roof Floods
XX1XXXXX
Side Roof Floods
XXXX1XXX
Additional Side Roof Floods
XXX1XXXX
| |
|