|
| I thought a little bit more about this than what may have appeared as non-candid feedback.
You may have been using adaptive curves and are testing this out in your yard and are wanting to drive back on the same line. if so, you need to go into the guidance settings, curve trac settings and check the box for Repeat Mode or somethign like that. If you were in the field or on an adjacent pass, so long as the guidance line on the screen goes to White from blue, you are heading within 80 degrees of the direction of the line, and within 40% of the track spacing of the line, it will allow you to use the resume button and engage AT. I wouldthink if you bought this from your dealer, they could at least gvie you this much training. | |
|
Help with autotrac
