|
| The aggressiveness setting is a starting point on getting the weave out of your line. You may also want to check your calibration settings, making sure your antenna offsets, wheelbase and all of those measurements are correct. Should be able to leave your aggressiveness between 90-110%.
You may want to recalibrated the EZ Steer, if the Angle Per Turn is set to high or low it may cause weaving (9XX0's I've been setting up lately my angle per turn setting is up between 16-18). I have heard that mounting the antenna in a different location can help performance, but I have always mounted it on top of the cab, and with fine tuning the cals in the EZ Steer, have gotten every machine working. Check the firmware on both the EZ-Steer and FMX.
How far off the AB line are you engaging the system? If you are a long ways away from the AB line or at a steep angle from your line the EZ-Steer will have trouble dialing in on the line which may cause the weave.
| |
|