|
SW Nebraska | Applicator, Here is a link to the pump I am wanting to use http://www.dultmeier.com/products/search/7775 It is a positive displacement diaphragm pump and I have a flow meter to put in the output line. I will be running it on my STX325. I will also be running the vacuum and seed drive motor. I have the high flow pump so gpm isn't an issue. With all the motors and folds I am tight on circuits and was hoping to tee into the seed drive circuit and run them in parallel.
My dealer is telling me he cant get a 540RPM pwm controlled motor so I will need chains and sprockets to speed it up. The pump is large for my application so it should be running at half or less most of the time. A direct drive setup seems cleaner to me.
Thanks for your help!! | |
|