|
SE ND | I recently purchased an ez guide 500 and an ez steer system. My experience with these systems are very limited so I would like to know if it is possibly and if so, what is required to;
1. Connect the implement switch on the drill/tank to the monitor to show where the drill is actually planting versus having the constant coverage mapping on the screen while not always having the drill working.
2. My 1900 tank is set up for variable rate. I realize that I'll probably need to purchase a program that will let me create prescriptions in a field and then upload the field onto the 500.
Thanks, it's greatly appreciated!
| |
|