|
N Central IA | I would recommend a Johnson, probably made not to far from you in Clarksville. I have a 5ft + plow pull it with a JD 8960 weighs roughly 46,000 lbs and I can pull it by itself 95% of the time. I have six and four in boots, the four does pull easier so I try and put the mains in with six in boot first then change to the four in boot, takes about 15 mins to switch. This plow will hold grade very well, and is built very well, can't see where it would have a weak point. I would also recommend a tile feeder, ran one this year for the first time and was pleased with how it worked. | |
|
Best pull type tile plow
