|
Central SD | The swivel bracket came with the original GS display (PF90385 $74). The dual mount I purchased from JD (PF90423 $34). Like I said above, I did use a beefier flat iron for extending the unit out (Item #6 below). The dual mount could easily be manufactured, with a little more creativity, I suppose the swivel mount could also be built. I drilled new holes. Don't know what you are putting it in, but be careful not to drill into electrical wires or A/C lines. There were none in the post of my sprayer.
Edited by Kamp 4/3/2007 15:08
 (PF90385.gif)
 (PF90423.jpg)
Attachments
----------------
 PF90385.gif (13KB - 230 downloads)
PF90423.jpg (18KB - 211 downloads)
| |
|
2600 Display Remount
