|
sc kansas | I started beans yesterday with my N6 and this is where it is at. Cyclinder is at 700, concave is at 1/2, bottom sieve is close to shut and the top is running pretty wide. Fan on 5. I was running small beans that are 15 so not getting much cracking and doing a good job of saving them. We cut corn with our 9600 so corn setting I have not ran on my 6. Hope this helps. You have a monster if you were use to a F. One other thing, the only difference in the 5 and 6 was bin capacity and about 30 hp of which is very easy to bump on that machine. I have bumped mine. | |
|
need help setting N5
