AgTalk Home
AgTalk Home
Search Forums | Classifieds (141) | Skins | Language
You are logged in as a guest. ( logon | register )

Ag Leader Grain EMU/moisture module issues!
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 9/24/2010 07:19 (#1372131 - in reply to #1371387)
Subject: RE: Ag Leader Grain EMU/moisture module issues!


Near Intersection of I-35 & I-90 Southern Mn.
Lightning - 9/23/2010 17:14

I've run into 3 combines now that had new moisture modules put on that had the polarity reversed on the wiper motor. Symptoms were blowing fuses and lack of real moisture changes. The motor was turning the wrong way and grinding up the corn. I even had one motor that got burned out. When you take the auger out, there is a bunch of ground up corn in the chamber. Just wander if anyone else ran into this around the country.


In some combines, the unit is mounted on the opposite side of the clean grain elevator which requires the motor to run in the opposite direction. Sounds as if there was some confusion somewhere along the line about the correct rotation.

We've had instances where we've had to replace the motor and we need to be certain that the rotation is correct. If it is backwards, we simpy pop out the pins on the motor connector and reverse them.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)