|
roaming | if your combine is AccuGuide-ready, you need to add a NavII controller and a 162, 252, or 262 receiver. There is no unlock or activation required in the Pro 600, unless you want row guidance. AFS RowGuide requires an unlock and a sensor kit on your cornhead. Unlocks in the receiver may be required depending on the receiver model and/or the level of accuracy desired.
There is no way to use your GS2 or Starfire receiver for AccuGuide. If you ONLY want yield mapping, you could use your Starfire receiver to feed GPS to the Pro 600, but for guidance a 162, 252, or 262 is required.
You can customize your Run screens any way you want. You can put all of your guidance windows on a page, all ym on another page, all combine stuff on another page, etc, or you can put a combination of the most-used windows on a single screen so you have everything at a glance. You can also decide how many windows go on each screen, and you can have several different sizes of maps, so you could put a small map on a screen with a bunch of other things, or you could put a full-screen map on a screen by itself.
You might like to check out the "Run Screen Layout Tutorial" here: http://www.caseihafs.com/tutorials/run_layout_swf/run_layout_swf.ht...
Other Pro 600 tutorials are here: http://caseihafs.com/tutorials.php
(the screens shown are not exactly the same as a 7120, but the concept is the same) | |
|