Posted 3/6/2007 15:08 (#115600 - in reply to #114676) Subject: Re: Does Seedstar need Starfire reciever?
Just like it is stated : It is critical that the following messages from the NMEA 0183 standard are in the signal: GGA, GSA, and RMC setup at 4800 baud, Data Bits 8, Parity none, Stop 1, Flow Control none
You MUST be at 4800 bauds and output at higher rate than 1Hz can cause overflow in the message string.
Does Seedstar need Starfire reciever?
