|
SE Wyoming | Here are a few pics from yesterday and today. Started off with a plow standard torn off. I took the assembly to the local machine shop. It was there at 9:00 am. I picked it up at 4:30 in the same spot in which I left it. I picked up a piece of 3/4 plate and built it myself. As fabrication is not one of my stronger points I was pleased with the results. I am so very glad for the plasma cutter. Now I just have to master the welder. We installed it this morning, and the furrow wheel cylinder came apart. Broke the piston off the bottom of the rod. Had an old one in the scrap pile. Between the two, I made it work. We finally got it in the field and rolling just in time to get rained out.
 (plowing 2010 038 (528 x 396).jpg)
 (plowing 2010 037 (528 x 396).jpg)
 (plowing 2010 036 (528 x 396).jpg)
 (plowing 2010 034 (528 x 396).jpg)
 (plowing 2010 035 (528 x 396).jpg)
 (plowing 2010 033 (528 x 396).jpg)
 (plowing 2010 041 (232 x 174).jpg)
 (plowing 2010 042 (528 x 396).jpg)
 (plowing 2010 043 (528 x 396).jpg)
Attachments
----------------
 plowing 2010 038 (528 x 396).jpg (44KB - 59 downloads)
plowing 2010 037 (528 x 396).jpg (59KB - 62 downloads)
plowing 2010 036 (528 x 396).jpg (51KB - 56 downloads)
plowing 2010 034 (528 x 396).jpg (87KB - 66 downloads)
plowing 2010 035 (528 x 396).jpg (76KB - 57 downloads)
plowing 2010 033 (528 x 396).jpg (78KB - 56 downloads)
plowing 2010 041 (232 x 174).jpg (8KB - 64 downloads)
plowing 2010 042 (528 x 396).jpg (35KB - 68 downloads)
plowing 2010 043 (528 x 396).jpg (38KB - 55 downloads)
| |
|
Today's misadventure in plowing....(pics)
