Missouri river bottom south of Sioux City, IA | I just got off the test stand and it works. I sent NMEA data to the laptop while the Intuicom sent its data into the FMX. You can set the baud rate on the Intuicom. That would allow you to match the ports baud rate to your device for the NMEA data input. I was running 38400 baud. I also use Intuicom’s internal GPS for the location data that is sent to Trimble’s VRS or IaRTN server. Otherwise that would tie up the NMEA output on that port.
Tom N. |
FMX NMEA output to external device
