|
Hanska, Minnesota | Just slide the hitch on the plow over as far as it goes. We did this on all our oliver and white plows. It's not ideal but works fine on a tractor set for 30" rows. Depending on the which series of plow you have there is 2 places to move it one on the draw bar just take out the 4 3/4" bolts and slide it over then losen the beam the draw bar turns in and slide it over should be 6 bolts. It Usially takes a tractor pulling on the plow with the plow hooked up to make it slide. Takes about a half hour. | |
|
Moldboard plow ???
