|
| Agree with the above posts. I currently have the in tank conversion which is marginal at best according to my fuel pressure gauge 9 lb at idle and pulls under 5 lbs easily. I have an Airdog 150 and Vulcan Drawstraw V sitting in the porch waiting to get put in. The kit comes with 1/2" lines all the way from the tank to the pump. This should cover my fuel needs now and if I ever increase hp levels. I ordered from Vulcan Diesel Performance. A little expensive but cheaper than replacing the injection pump. According to the folks on the Turbo Diesel Register it should hold at 15 lbs which will cool the injection pump nicely. | |
|