|
Sunnyvale, CA | I hope you did get T2 with your EZ-Steer system, because articulated vehicles run better with the T2 option. If you have an articulated vehicle, use the 4WD setup selection instead of sprayer in the vehicle setup. If you put the antenna as far forward as possible you will have best results. Then set up the vehicle dimensions. The wheel base is the distance between the axles. For a starting point, use an angle per turn in the 15 to 20 range. Then run through the EZ-Calibration . You can run through the EZ-Calibration a second time if the steereing is not close enough for you, and when you do run EZ-Calibrate the second time, you should decline the choice to reset all settings, so your first run will be the starting point for the second run through. | |
|