|
| You hit the "nail on the head".
You need to add a DGPS receiver and a data card. If this system (and yield mapping) is new to you, it might be worth your time to buy the receiver from a dealer that can supply the card as well. Perhaps, if you buy both of those, they will take the time to run you through some of the basics of calibration and field naming (especially if you don't have the OM for the yield Monitor). I haven't checked, but the Service Manager at my dealership said that he thought the OMs for this model of yield monitor were not in print any more. If you have probs with that, someone on this forum can get you a copy. Other than that, you should be set.
Have a safe harvest. | |
|
TO MAKE YIELD MONITOR MAP
