AgTalk Home
AgTalk Home
Search Forums | Classifieds (92) | Skins | Language
You are logged in as a guest. ( logon | register )

Agleader 1200 guidance
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
OettingAgService
Posted 5/21/2023 12:35 (#10237733 - in reply to #10236745)
Subject: RE: Agleader 1200 guidance


West Central Missouri
1666guy - 5/20/2023 16:54
Erase your configurations and redo them, along with recalibrating the SteadySteer and carefully checking your offsets.


WHOA!! Hold the phone...

That's the nuclear option right there, and erasing configurations will take out logged maps. There's no reason to go to the nuclear option on simply solvable settings changes.


Go to an open area of the field. Turn off planting somehow. Disengage meters, shutoff vacuum, turn of master switch if clutching. No need to drop seed, do whatever you need to do to stop that.

Load an AB straight. Pull the planter down that line, in the ground, long enough for the system to stabilize well locked on the line. Now come down that line from the opposite direction. Get on the line 100 feet early, with the planter on line. Stop when you hit your earlier pass, and see if the row units in the opposite direction pass line up with the trenches in the original direction pass. If the planter has an offset issue, it will miss. If it misses by 6 inches, then it's actually off by 3 (alternate direction passes double the error). This will point out a need to either repeat steadysteer tilt calibration, or put in an implement offset.

Nuking the config at step #1 is totally jumping the shark...



Edited by OettingAgService 5/21/2023 12:39
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)