|
SESD | Info from the knowledgebase below. Based on that I'd say it's the kit I'd order for a system like yours, might need to repin some connectors and put new ends on a cable or two but that's doable.
Are the existing steering valves compatible with SteerCommand Z2?
Yes, SteerCommand Z2 can work with previous sold steering valves such as Hydac and Vickers valves. Some adapter cables are available.
Note: The SteerCommand Z2 ratiometric valve is not supported with the legacy systems.
Is the existing WAS compatible with SteerCommand Z2?
Yes, the SteerCommand sensor (Potentiometer) will work with SteerCommand Z2 but recommend ordering the 4004398 (Hall Effect) if upgrading from legacy steering to SteerCommand Z2. The new sensor (Hall Effect) will also work on the legacy system. Pins A and C will need to be flipped to make work.
SteerCommand Z2 kit PN 4200200-146 does not include proper cabling for the use of legacy reactive steering coils.
Details
When ordering a SteerCommand Z2 Legacy Valve Adaptor Kit (PN 4200200-146) for a machine utilizing legacy reactive steering solenoids, PN 4004787-4 will also need to be ordered. However, the legacy solenoid coils utilize a 2 pin deutsch connection while PN 4004787-4 utilizes 2 pin metripack connectors. Users will need to supply custom adapters or make necessary modifications to complete the install.
Version | |
|
Ag Leader valve to new Z2 steering
